Physical characteristics
- Dimensions: 9” x 7” x 4.5”
- Weight: 5 lbs.
Environmental
- Operating Temperature: Range: 5°C to 40°C
- Storage Temperature Range: -5°C to 55°C
- Relative Humidity: 0-90% non-condensing
- Atmospheric Pressure: 500-1060 mbar
- Protection against ingress of fluids: IPX1 – Ordinary (without protection against ingress of water)
Display
- 6.5” Color VGA Touch screen LCD (640X480)
- Viewing angle ≤ 170 degrees
- Brightness at least 300 nits and backlight cold cathode fluorescent.
Power Supply
- Input Voltage: 90 – 264V AC
- Input Frequency: 47 – 63 Hz
- Input Current Full Load Low Line: 1.5A RMS max
- Input Leakage Current: < 250µA
- Output Power: 60W
- Output Voltage: 12V ± 3%
- Output Current: 5A max; 0.1A min
- Output Rise Time: < 100mS
Battery
- Minimum 3 hours runtime w/on-screen Indicator
- Removable and rechargeable battery supply
System Features
- Software easily upgradable
- Real-Time System Configuration
- Patient Quick Disconnect (EtCO2 Module)
- Nurse call Support
- Night Dimmer
System Audio
- High Priority alarm audio
- Informational audio
- Button key Click
| |
Wi Fi 802.11 module
- Communication: TCP and UDP to serial 115.2KB
- Wireless Interface: 802.11 b/g with WEP, WPA
- Network Comm: ARP, UDC, TCP, ICMP, SNMP
- Firmware Updates: TFTP
- Supply Voltage: 3.3V ±0.15V
- Operating Temp: 0 to 70 deg C
- Frequency Range: 2.4 – 2.484 GHz
- Output Power: 14 ±2 dBm
- Receiver Sensitivity: > -69 dBm
- Security: WEP /128,WPA/802.11i
- Antenna: either internal or external to module
SPO2 Module
- SpO2 Range: 0 – 100%
- Accuracy: ± 3% (DS-100A)
- Resolution: 1%
- Averaging: 2, 8, or 16 seconds.
- User selectable
- Pulse Rate Range: 30 – 300 bpm
- Pulse Rate Accuracy: ± 1% of full scale
- Pulse Rate Averaging: 8 seconds
ETCO2 Module
- ETCO2 Range: 0 – 99mm Hg / 0 – 13% Vol
- ETCO2 Accuracy: ± 2mmHg from 0 - 38mm Hg
- ±5% from 39 – 76mm Hg
- ±8% from 77 – 99mm Hg
- Breath Rate Range: 0 -150 bpm
- Breath Rate Accuracy: ± 1%
Regulatory Compliance
Complies with both domestic and international regulatory standards and guidelines relevant to medical devices including:
- IEC 60601-1: Medical Electrical Equipment, part 1: General Requirement for Safety
- ISO 14971: Medical Device Risk Analysis
- IEC 1041: Information Supplied by the Manufacturer with Medical Devices
- IEC 60601-1-2: Electric Magnetic Compatibility
- IEC 60601-1-4: Programmable Medical Systems
- ISO 21647: Performance of Respiratory Gas Monitors
- ISO 9919: Safety and Performance of Pulse Oximeter for Medical Use
(Specifications subject to change without notice)
|